|
"The results from on the tips I had processed awhile ago have shown extraordinary life extension. They have recorded 10,000 more welds with the treated tips. They normally get 2,000 welds and now achieved 12,500 welds!"
"Custom made T-15 insert are giving four times the life of Valentine carbide inserts machining A-286 with an interrupted cut. HSS inserts gave double the life of carbide."
"Astonishing results! Prior to treatment, our cutting tools lasted 3 days. Now they last 3 weeks. Through put is up while maintenance is down for less than 10% of tooling replacement cost."
"We drilled 13,400 feet with a 5 5/8” Varel roller cone button bit that was processed. The normal life of this bit would have been 6000 to 8000 feet of grout holes. The process extended the life of the bearings and the carbide buttons and reduced washing of the rollers. We drilled over 20,000 feet with a 5 7/8” Varel roller cone button bit that was processed. The process has reduced wear on this bit in the same way as it did on the 5 5/8” bit. The normal life of this bit would have been about 8000 feet of grout holes. We drilled over 16,000 feet with a 6” Varel roller cone button bit that was processed. The process reduced wear on this bit in the same way as it did on the 5 5/8” bit. The normal life of this bit would have been 1000 to 1200 feet of water wells". |
|
|
|
|
A WORLD OF OPPORTUNITIES FOR YOUR BUSINESS
Home | Store | Applications | Research | Results/Benefits | News | About Us | Privacy/Terms | Site Map | Contact Us
©2007 Cryotron Corporation. All rights reserved.
|
